Preparing to use your acer c500 series, Charging your acer c500 series, Insert the battery – Acer C500 User Manual

Page 25

1 G e t t i n g s t a r t e d

Preparing to use your Acer c500 Series

The following easy installation tasks let you begin using your Acer c500 Series:

• Installing the Microsoft

ActiveSync

software in your computer

• Connecting the computer

• Charging your Acer c500 Series

• Setting up your Acer c500 Series

• Performing the first ActiveSync operation

Charging your Acer c500 Series

For initial use, you need to charge your Acer c500 Series for 4 hours. After that, you
can charge it for a few minutes each day to recharge the battery to full capacity.
Normally, you can use your Acer c500 Series for 8 straight hours of operation
(backlight inactive) before you need to recharge the battery.

Insert the Battery

Insert the battery pack into the battery bay, then place the battery cover on top of
this, making sure that the battery release clips clip into place.

Press in on both battery release

clips at the same time with a pen

or similar object. Do NOT use the

stylus to do this.

Lift the battery cover off.

(Image shown is face down)