Gentec-EO QUAD-4Track - Manual (Page 5)

QUAD-4Track User’s Manual Revision 2.1 5
Introduction
The QUAD-4TRACK is an advanced Beam Position Measurement system. It is used with
the Pulse Track Applications Software, which creates a full featured data acquisition
system for measuring and displaying laser energy and beam Position.
The QUAD-4TRACK is used with compatible Gentec-EO probes, the DPQ-J9, DPQ-J20,
DPQ-R9, and DPQ-R20. The J series probes are used for pulsed laser applications, and
the R series are used for Radiometric application. The QUAD-4TRACK can measure
pulsed lasers up to 1000pps on each channel when using the J series probes. When using
the R series probes the beam modulation rate can be set from 5Hz to 50Hz
Figure 1 shows the QUAD-4TRACK front panel. Figure 2 shows the QUAD-4TRACK
back panel.
Figure 1, QUAD-4TRACK Front Panel
Figure 2, QUAD-4TRACK Back Panel
Installing the Software