Languages, Thernet, Onfiguration menu window – Gentec-EO MAESTRO User Manual

Page 25

Text mode
Original mode

MAESTRO User’s Manual Revision 8.1

The device can now be accessed with a simple TCP client application, such as HyperTerminal.

Only

native MAESTRO commands are supported with the Ethernet communication. Please make sure that the
SOLO2 Serial Compatibility is unchecked in the Serial commands menu (refer to section 2.4.1.3).

Please

refer to section 3.2 for installation instruction on the PC.

Fig. 2-9 Ethernet Configuration menu window

2.4.1.5

Languages

The Maestro allows the user to choose between an English, French, German, or Japanese display.
Chinese will also be available in the future. Check Gentec-

EO’s website for updates.