Asus P5GV-MX - Manual (Page 74)

2-28 Chapter 2: BIOS setup
2.5.5 APM Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Enabled or disable
APM.
APM Configuration
Restore on AC Power Loss [Power Off]
Resume On RTC Alarm [Disabled]
Resume On Ring [Disabled]
Resume On PME# [Disabled]
Power On By PS/2 Keyboard [Enabled]
Keyboard Wakeup Password : Not Installed
Power On By PS/2 Mouse [Disabled]
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
Configuration options: [Power Off] [Power On]
Resume On RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this
item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC
Alarm Minute, and RTC Alarm Second appear with set values. Configuration
options: [Disabled] [Enabled]
RTC Alarm Date [15]
Sets the RTC alarm date. Use the <+> or <-> keys to adjust the
values. Configuration options: [Everyday] [01] [02] ~ [31]
RTC Alarm Hour [12]
Sets the RTC alarm hour. Use the <+> or <-> keys to adjust the
values. Configuration options: [00] [01] ~ [23]
RTC Alarm Minute [30]
Sets the RTC alarm minute. Use the <+> or <-> keys to adjust the
values. Configuration options: [00] [01] ~ [59]
RTC Alarm Second [30]
Sets the RTC alarm second. Use the <+> or <-> keys to adjust the
values. Configuration options: [00] [01] ~ [59]
Resume On Ring [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. Configuration options: [Disabled] [Enabled]