AT&T TL74258 - Manual (Page 26)

21
Intercom
Using a cordless handset:
Use the intercom feature for conversation
between handsets or the telephone base.
1. Press INT. The screen will show INTERCOM TO:
2. Enter a handset number. The screen will show
CALLING HANDSET X. The called handset will
ring, and its screen will show
HANDSET Y IS
CALLING.
-OR-
Enter 0 to intercom with the telephone base. The
screen will show CALLING BASE. The telephone
base will ring, and its screen will show HANDSET
X IS CALLING.
3. On the ringing handset, press PHONE
/FLASH
,
INT, SPEAKER, or any dial pad key (0-9, * or #)
to answer the intercom call.
-OR-
Press
SPEAKER, or any dial pad key (0-9, *
or #) on the telephone base, or lift the corded
handset to answer the intercom call.
NOTES:
1. Before the intercom call is answered, you can cancel the
intercom call by pressing OFF/CLEAR or INT on the
calling handset.
2. If the called handset is not answered within 100 seconds or
if it is in the directory or call log mode, or on a call, or out of
range, the calling handset will show the message UNABLE
TO CALL TRY AGAIN.
3. Pressing OFF/
CLEAR
or MUTE/
REMOVE
will temporarily
silence the intercom ringer.
To end the intercom call:
• Press
OFF
/CLEAR
or INT on either handset.
-OR-
Press
SPEAKER on the telephone base.
-OR-
Place handset in the charger.
Telephone operation