beautypg.com

Hf series – General Pump HF Repair Manual User Manual

Page 3

background image

GENERAL PUMP

A member of the Interpump Group

HF SERIES

Page 3

1. INTRODUCTION

This manual describes the instructions for Repairing HF Series pumps, and must be carefully read and

understood before performing any repair intervention on the pump. Correct use and adequate maintenance is

fundamental for the pump’s regular operation and long wear. General Pump declines any responsibility for

damage caused by the misuse or the non-observance of the instructions described in this manual.

2. REPAIR INSTRUCTIONS

2.1 Crank Mechanism Repair

Crank mechanism repair operations must be carried out after draining the oil from the crankcase. To drain

the oil, remove the oil dipstick, 1, Fig. 1, and then the draining plug (2, fig. 1).

Exhausted oil must be collected in an appropriate receptacle and disposed of in

designated locations. In absolutely no case may it be disposed of in the environment.

Ref 300623 Rev.A

01-12