General Pump 66 Series TSF - Manual (Page 3)

GENERAL PUMP
A member of the Interpump Group
Ref 300872 Rev. A
11-11
TSF Series “66”
Servicing Instructions
Replacing Packings:
1) Remove manifold from crankcase.
2) Insert proper extractor collet through main seal retainer.
Tighten collet and extract retainers, packings and
head rings.
3) Apply grease to the packing assembly before installing in
cylinders.
4) Place proper insertion tool in cylinder and install packing
assembly, retainer and low pressure seal retainer using
the proper insertion tool.
5) Repeat this sequence for each cylinder.
6) Align outside pistons in forward position.
7) Coat each plunger with grease.
8) Install manifold and torque retainers to specifications.
Changing Oil:
1) Remove drain plug.
2) Drain oil.
3) Replace plug..
8) Refill with new oil.
Recommended Tools/Supplies:
1) KINSTF66 Packing Insertion Kit, 66 Series
2) 100783 Complete Extraction Kit
Includes the following tools:
2530016 handle 2530020 15mm sleeve
2530017 bolt 2530021 18mm sleeve
2530018 pin 2530022 20 mm sleeve
2530023 22 mm sleeve
2530024 24 mm sleeve
3) 190446 Oil Drain Kit
4) 100295 General Pump Series 100 Oil (1-16 oz. bottle)
100214 General Pump Series 100 Oil (6-16oz. bottles)
100216 General Pump Series 100 Oil (24-16 oz. bottles)
G GEEN NEER RA ALL PPU UM MPP 1174 Northland Drive • Mendota Heights, MN 55120
Phone: (651)686-2199 • Fax: (800)535-1745 • e-mail: [email protected] • www.generalpump.com