Finish Thompson LS-Jr - Manual (Page 5)

Service 1-800-888-3743
Part Number J100962, Rev 2
Literature ID Number FT03-878A
CHEMICAL REACTION DISCLAIMER
The user must exercise primary responsibility in selecting the product’s materials of construction, which are compat-
ible with the fluid(s) that come(s) in contact with the product. The user may consult Finish Thompson, Inc. (manu-
facturer) and a manufacturer’s representative/distributor agent to seek a recommendation of the product’s material
of construction that offers the optimum available chemical compatibility.
However neither manufacturer nor agent shall be liable for product damage or failure, injuries, or any other damage
or loss arising out of a reaction, interaction or any chemical effect that occurs between the materials of the product’s
construction and fluids that come into contact with the product’s internals.
WARRANTY
Finish Thompson, Inc (manufacturer) warrants this product to be free of defects in materials and workmanship for a
period of 3 years plus lifetime on the LS heater from date of purchase by original purchaser. If a warranted defect,
which is determined by manufacturer’s inspection, occurs within this period, it will be repaired or replaced at the
manufacturer’s option, provided (1) the product is submitted with proof of purchase date and (2) transportation
charges are prepaid to the manufacturer. Liability under this warranty is expressly limited to repairing or replacing
the product of parts thereof and is in lieu of any other warranties, either expressed or implied. This warranty does
apply only to normal wear of the product or components. This warranty does not apply to products or parts
broken due to, in whole or in part, accident, overload, abuse, chemical attack, tampering, or alteration. The manu-
facturer accepts no responsibility for product damage or personal injuries sustained when the product is modified in
any way. If this warranty does not apply, the purchaser shall bear all cost for labor, material and transportation.
Manufacturer shall not be liable for incidental or consequential damages including, but not limited to process down
time, transportation costs, costs associated with replacement or substitution products, labor costs, product installa-
tion or removal costs, or loss of profit. In any and all events, manufacturer’s liability shall not exceed the purchase
price of the product and/or accessories.