Fairbanks SCB-R9050 Series Ultegra MAX - Manual (Page 9)

Section 2: Installation
03/2014 9 51244 -- Rev. 4
1. The display will show GrU x. This is the Gravity Use Zone. Select the
proper zone number for your location. Use the [ UNITS ] key to toggle to
the selection. The choices are:
-8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Press the [ ZERO ] key to accept the choice selected and the display will
indicate AZt 0.5. Press the Program button to return to the weighing
mode.
This completes setting the Gravity Use Zone setting.
Zone Latitude (degrees) Reference City
-8 68.659 Point Hope, AK
-7 64.929 Fairbanks, AK
-6 61.567 Anchorage, AK
-5 58.444 Fort Vermilion, Alberta
-4 55.485 High Prairie, Alberta
-3 52.638 Coventry, England
-2 49.865 Winnipeg, Manitoba
-1 47.137 Tacoma, WA
0 44.427 St. Johnsbury, VT
1 41.711 Des Moines, IA
2 38.963 Kansas City, MO
3 36.156 Tulsa, OK
4 33.257 Tuscaloosa, AL
5 30.223 Austin, TX
6 26.992 Navojoa, Mexico
7 23.467 Mazatlan, Mexico
8 19.476 Mexico City
9 14.622 Guatemala City
10 7.326 Bucaramanga, Colombia