Fairbanks SCB-R9050 Series Ultegra MAX - Manual (Page 7)

03/2014 7 51244 -- Rev. 4
Section 2: Installation
2.1. Unpacking
1. Remove the scale from the packing box and place on a flat surface
where it will be used.
2. Using the bubble level, adjust one or two feet minimally to level the
platform. Do NOT adjust all 4 feet.
2.2. Connections
1. USB - To use the USB interface, plug the included six foot (6') USB
cable into the scale base where marked USB port in the diagram in
Section 2.3 Computer Connections. Connect the other end into a
USB port on your computer or USB hub.
2. REMOTE DISPLAY - To use a remote display, plug the remote
display into the connector on the scale base where indicated
Remote Display port in the diagram under Section 2.3 Computer
Connections. Mount the remote using 2 screws or use a Velcro
®
strip (not included).
A remote display pillar is also available.
3. AC ADAPTER - To use an AC adapter, plug the barrel plug into the
back of the scale where marked optional power, and the AC
adapter unit into a proper outlet. Check the AC receptacle for proper
voltages prior to plugging in the adapter.
4. Check with your shipping software provider for compatible
computer software.