ARRI Projection HDTV - Manual (Page 36)

36
For each entry in the soft clip configuration file, the
following parameters are valid:
soft clip name of the setting, used as value of soft clip parameter of the CMS node. Example: “mysoftclip”.
DL luminance difference, used for each color if not specified color specific
dC chroma difference, used for each color if not specified color specific
dL.R luminance difference for red
dL.G luminance difference for green
dL.B luminance difference for blue
dL.C luminance difference for cyan
dL.M luminance difference for magenta
dL.Y luminance difference for yellow
dC.R chroma difference for red
dC.G chroma difference for green
dC.B chroma difference for blue
dC.C chroma difference for cyan
dC.M chroma difference for magenta
dC.Y chroma difference for yellow
The color specific settings (dL.R , etc.) always take
precedence over the color independent setting (dL),
regardless of the order of the arguments. This means,
there is no difference in specifying e.g. dL.R before or
after dL .
Color Management
5.2.4