Agilent Technologies 6012B EN - Manual (Page 24)

24 Installation
Rear Panel Screw Sizes and Part Numbers
Refer to the following list if you need to replace any of the rear panel connection hardware:
Agilent Models 6010A, 6011A, 6012B and 6015A
Item Description Agilent Part number
ac input cover 5060-3237
ac input cover screws M4 X 0.7 X 60 mm (qty 4) 0515-0156
ac input barrier block 3-terminal barrier block 0360-2217
ac input barrier block screws 8-32 X 5/16 (qty 3) included with ac input barrier block
dc output cover 5040-1626
dc output cover screws M4 X 0.7 X 10 mm (qty 3) 0515-0414
control signal barrier block 6 - terminal barrier block 0360-2195
sense barrier block 2 - terminal barrier block 0360-2192
barrier block screws M3.5 X 0.6 X 6 mm (qty 8) included with dc barrier blocks
output bus bar screws M5 X 0.8 X 12 mm (qty 4) 0515-0155
output bus bar sense screws M2 X 0.4 X 8 mm (qty 2) 0515-0212
red/black sense wires wire kit 5060-2913
Agilent Model 6023A and 6033A
Item Description Agilent Part number
barrier block cover 06023-00009
control signal barrier block 6 - terminal barrier block 0360-2195
sense barrier block 2 - terminal barrier block 0360-2192
barrier block screws M3.5 X 0.6 X 6 mm (qty 8) included with dc barrier blocks
dc output cover 0360-2191
dc output cover screws M4 X 0.7 X 8 mm (qty 2) 0515-1085
output buss bar screws (large) M4 X 0.7 X 8 mm (qty 2) 0515-0885
output buss bar screws (small) M3 X 0.5 X 6 mm (qty 2) 0515-0886
sense jumpers 0360-2190