AEG LAVAMAT 50265 - Manual (Page 21)

Operating Instructions
21
Changing Spin Speed/selecting
o (RINSE HOLD)
0 To change the Spin Speed for the final rinse or
select
o (RINSE HOLD):
Keep pressing the Spin Speed/
o (RINSE HOLD)
button until the indicator light for the desired
speed (or
o /RINSE HOLD) comes on.
If
o (RINSE HOLD) is selected, the washing is left
to soak in the last rinse water, without spinning.
3 If the Spin Speed is not changed, the final spin is automatically ad-
justed to suit the washing programme:
The speed of intermediate spins depends on the selected programme
and cannot be changed.
Starting the Wash Programme
0 1. Check that the water tap is open.
2. To start the wash programme, press the O/s (START/
PAUSE) button. The wash programme starts.
3 If L (END) flashes 4 times when the O/s (START/
PAUSE) button is pressed, the door is not closed properly. In this case,
push the door in firmly, and press O/s (START/PAUSE) again.
Programme Progress
Programme Progress Display
Prior to the start, the programme steps chosen
are displayed by the programme progress display.
During the wash programme, the current programme
step is displayed.
–
t (COTTONS/LINEN)
1000 revolutions per minute
– ECO (ENERGY SAVING) 1000 revolutions per minute
–
} (EASY-CARES)/<(EASY IRON) 1000 revolutions per minute
–
à (DELICATES)
1000 revolutions per minute
–
s (WOOL)/ Ñ (SILK)
P (Handwash)
1000 revolutions per minute