Bosch TDA7658 ferro da stiro ProEnergy SensorSecure 2400 W max. - Manual (Page 17)

17
BOSCH
ENG
lISH
Trouble shooting guide for minor issues
Problem Probable cause Solution
The iron does not heat
up.
1. Temperature control dial in very
low position.
2. No mains supply.
1. Turn to a higher position.
2. Check with another appliance or
plug the iron into a different
socket.
The lamp at the back of
the water tank does not
switch on
1. The iron is cooling.
2. The iron does not heat up.
1. Wait until the heating cycle is
completed.
2. See previous paragraph.
The clothes tend to
stick.
1. The temperature is too high. 1. Turn the temperature control dial
down and wait until the iron has
cooled down.
Water comes out
together with steam.
1. Temperature regulator in very low
position.
2. Steam regulator in very high
position with low temperature.
1. Turn the temperature control dial
regulator to a higher position and
wait until the operating indicator
switches off.
2. Turn the steam regulator to a
lower position.
Steam does not come
out.
1. Steam regulator in closed position
.
2. No water in the tank.
3. The temperature is too low.
Anti-drip system not activated.
1. Turn the steam regulator to an
open steam position.
2. Fill the tank.
3. Set a higher temperature if
compatible with the fabric.
Spray does not work. 1. No water in the tank.
2. Obstructed mechanism.
1. Fill the water tank.
2. Contact the Technical Service.
Water drips out of the
soleplate.
1. The steam regulator is not
properly closed.
1. Ensure the steam regulator is set
to the position .
Do not forget to empty the tank
when you have finished ironing.
Smoke comes out
when connecting the
iron for the first time.
1. Lubrication of some of the internal
parts.
1. This is normal and will stop after a
few minutes.
If the above does not solve the problem, get in touch with our customer service.
You can download this manual from the local homepages of Bosch.