Switching the appliance on, Operating tips, Setting the temperature – Bosch GSN36BW30 Congelatore verticale Bianco User Manual
Page 26: Freezer compartment, Energy saving mode, Energy saving mode display, fig. "/ 4, illuminates
en
26
Switching
the appliance on
Fig. 2
Switch on the appliance with the On/Off
button 1/8.
A warning signal sounds.
The temperature display 1 flashes
and the alarm display 3 is lit.
Press the “alarm” button 7. The warning
signal switches off and the temperature
display 1 stops flashing.
When the freezer compartment has
reached its set temperature, the alarm
display 3 goes out.
Operating tips
■
After the appliance has been switched
on, it may take several hours until
the set temperature has been
reached. Do not put any food
in the appliance beforehand.
■
The fully automatic NoFrost system
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
■
The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
■
If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.
Setting
the temperature
Fig. 2
Freezer compartment
The temperature can be set from -16 °C
to -26 °C.
Keep pressing temperature setting
button 5 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on display 1.
We recommend a factory setting of -
18 °C in the freezer compartment.
Energy saving mode
When the appliance is not used,
the display on the controls switches
to energy saving mode.
■
Energy saving mode display, Fig. 2/
4, illuminates.
■
The luminosity of the temperature
displays is reduced.
■
When the “Super” function is switched
on, the corresponding super display is
lit (Super freezing display, Fig. 2/2).
As soon as you operate the appliance,
e.g. open door or press any button,
the display switches to normal
illumination.