AEG FAVORIT 88050 I - Manual (Page 19)

Operating Instructions
19
Activating/deactivating the acoustic signal
In addition to the optical display (e.g. indicating the end of the cycle,
errors) you can also choose to set an acoustic signal.
1. Press the ON/OFF button.
The LED in the ON/OFF button will become illuminated.
3 If other indicators are also illuminated, this means that a dishwashing
cycle has been activated. The dishwashing cycle must be deselected
(RESET):
Press function buttons 1 and 2 simultaneously for approx. 2 seconds.
All other indicators will go out.
2. Press the function buttons 1 and 2 simultaneously and keep them
pressed.
The LED indicator for function button 3 will flash.
3. Press function button 3.
The LED indicator for function button 3 will flash.
The multi-display will indicate the current setting:
4. Pressing function button 3 will change the setting.
5. Once the multi-display is indicating the required setting, press the ON/OFF
button.
The setting is now saved.
0b
Acoustic signal deactivated
1b
Acoustic signal activated (ex-factory setting)