FEC AFC1100 User Manual
Page 2
)(& ,QF
1.1
About This operations manual
This manual details the configuration, components, specifications, and the operation of the
AFC1100 Fastening System.
The following table outlines the contents of each chapter:
Electrical reference drawings of standard cables
and connections.
Reference Drawings
Appendix A
Descriptions of fastening rejects, equipment
Abnormals, and corrective action.
Troubleshooting
Chapter 9
Guide for preventive maintenance.
Maintenance and
Inspection
Chapter 8
Instructions for the input of preset data and
monitoring explanations.
System Operations
Chapter 7
Basic fastening operations and presetting
procedures.
Fastening Instructions
Chapter 6
Preliminary power on and operational tests.
Power Up and Initial
Checks
Chapter 5
Equipment installation procedure, dimensions,
Input and Output signal descriptions and
requirements for PLC programming.
System Setup and
Wiring
Chapter 4
Description of standard and optional system
components.
System Description
Chapter 3
General specifications of the AFC1100 System.
Specifications
Chapter 2
Basic characteristics and requirements of the
AFC1100 System.
Outline
Chapter 1
Contents
Item
Chapter
Chapter 1: Outline (Rev. 8/98)
Page 1-2