FEC AFC1200 - Manual (Page 5)

)(& ,QF
2.4 Axis Controller Unit Specifications
200~230 VAC, 3-Phase, 50/60 Hz AXIS UNIT INPUT POWER
100A 70A 70A 50A 50A 50A AXIS UNIT IN-RUSH CURRENT
4A 2A 2A 1A .625A .625A AXIS UNIT PEAK CURRENT
400W 200W 200W 100W 70W 60W TOOL MOTOR RATING
MFA040
HA1NS
BXE020-
A912
MFA020
HA2NSA
MFA010
HA2NSA
BNE006-
A117
MFA006
HA2NSA
TOOL MOTOR MODEL
NUMBER
M4 W3 M3 M2 W1 M1 TOOL MOTOR TYPE
AXIS-210 AXIS-205 AXIS-203 AXIS UNIT TYPE
Example: Tool (nutrunner) model DFT-401M2-S has an M2 motor type, and must be used
with a Type 203 Axis Unit.
NOTE: The M1 and W1 motors are functionally identical units, and can be interchanged
without any special considerations. The same is true of the M3 and W3 motors.
CAUTION: If the equipment is powered on and off repeatedly, the circuit breakers might
trip due to the in-rush current.
Chapter 2: Specifications
Page 2-5