Pen holder installation – Elite Screens Insta-DE User Manual
Page 4
020614-JA
www.elitescreens.com
4
10. Repeat steps 7-9 to finish attaching the material to the wall and complete the Installation.
Pen holder installation
Method one: Peel the tape strip off the back of the pen holder and attach the pen holder to the wall or your
preferred location.
Method two: Install the included screw in the wall and hang the pen-holder. See diagram below for details.
Caution:
The double-sided tape is meant to be permanent for the life of the product. It does not remove easily. Please
attach very carefully to avoid having to remove the product and positioning it in a different location.
Use only the included erasers to remove and erase dry-erase markings. For a deep clean, we recommend using
a non-alcohol based dry-erase board cleaner with a soft microfiber cloth.
Elite offers a replacement kit (part number ZER3) which includes:
1 x bottle of 8.45 oz cleaning solution
1 x microfiber cloth
2 x high density foam erasers
2 x sets of dry-erase markers (4 total)
For more information visit
Contact your reseller or visit shop.elitescreens.com for pricing and purchase.
For more information, technical support or your local Elite Screens contact,
please visit
Wall
Pen holder