Electronics International FL-2 - Manual (Page 18)

FL FL FL FL FL-2RA-12 and FL -2RA-12 and FL -2RA-12 and FL -2RA-12 and FL -2RA-12 and FL-2RA-24 -2RA-24 -2RA-24 -2RA-24 -2RA-24
Wiring Diagram Wiring Diagram Wiring Diagram Wiring Diagram Wiring Diagram
Circular Connector
3' Analog LED Lighting Control Line, connects to Panel Light Rheostat.
12/24 volts dims the analog LEDs.
3' External Warning Control Line. Can be connected to a relay to
control an external light, buzzer, etc. Grounds when Red Warning Light
is on. Current must be limited to 1/10 amp maximum.
3' Backlight Control Line, connects to 24 Volt Bus via 1 amp fuse (may
use the power fuse). Connect to ground for 12 Volt System.
3' Backlight Control Line, connects to 12 Volt Bus via 1 amp fuse (may
use the power fuse). 12 volts turns on the digital display backlight.
3' Ground Lead, connects to Ground.
3' Power Lead, connects to 12 or 24 Volt Bus via 1 amp fuse or circuit
breaker.
White/Yel
Black
Red
White/Brwn
White/Red
White/Orng
Wire Harness
Do not use screws Do not use screws Do not use screws Do not use screws Do not use screws
longer than 1/2" (4 ea.). longer than 1/2" (4 ea.). longer than 1/2" (4 ea.). longer than 1/2" (4 ea.). longer than 1/2" (4 ea.).
23 23 23 23 23
16
Brown Wire
6' Left Tank Input, connects to Left Tank Resistive Sensor.
Airframe Ground
Orng Wire
6' Right Tank Input, connects to Right Tank Resistive Sensor.