AEG 80850 I - Manual (Page 38)

Installation and Connection Instructions
38
• Depending on type, the dishwasher is to be installed as follows:
Dishwashers That Can Be Integrated
(see installation template supplied)
3 The door of the appliance can be fitted with a wooden furniture door
with the following dimensions:
1 If the furniture door is longer than 600 mm, the door of the appliance
cannot be opened completely (the facing panel bumps against the
plinth).
If this is the case, the plinth must be cut out (see installation template)
or the brace adapter for the extra long door BLT 60 must be used.
You can obtain this with the E No. 911 239 008.
Built-In Dishwasher
(see enclosed installation instructions)
Free-Standing Appliances
1 •can be set up as stand-alone without additional installation.
If the dishwasher is set up next to a cooker, a heat-insulating, non-
flammable plate must be mounted between the dishwasher and the
cooker, flush to the top edge of the work surface (depth
57.5 cm). The plate should have aluminium foil on the side facing the
cooker.
Width 587mm 591 – 594 mm
Thickness: 16 – 24 mm
Height:
(variable) dependent on – Recess height
– Plinth height
– The adjustment so that the unit matches the height of
the adjoining units
The exact height of the adjoining units must be meas-
ured at the place of installation.
Weight: max. 8 kg