Atlantis Land A02-RA242-W54 - Manual (Page 48)

WEBSHARE 242W
42
• Packet Type: Specify the packet type (TCP, UDP, ICMP or any) that the rule will be
applied to.Select TCP if you want to scope for the connection-based application
service on the remote server using the port number. Or select UDP if you want to
scope for the connectionless application service on the remote server using the port
number.
• Log: Choose “Yes” if you want to generate logs when the filer rule is applied to a
packet.
• Action When Matched: If any packet matches this filter rule, Forward or Drop this
packet.
• Source IP Address: Enter the incoming or outgoing packet’s source IP address(es).
• Source Port: Check the TCP or UDP packet’s source port number(s).
• Destination IP Address: Enter the incoming or outgoing packet’s destination IP
address(es).
• Destination Port: Check the TCP or UDP packet’s destination port number(s).
E.G.