Audiovox CDM-9150X - Manual (Page 88)

88
Data/Fax Mode (F72)
This feature allows you to set the mode for receiving
data or fax calls.
To set the Data/Fax Mode
1. Press
F
7
PQRS
2
ABC
.
2. Select the desired mode by
pressing
F
.
Off: No data or fax calls can be received.
Data: Can receive data.
Fax: Can receive fax.
Data Once: Data can be received for one call.
Fax Once: Fax can be received for one call.
Notes: 1. “Data Once” and “Fax Once” will be reset to “Off”
automatically after receiving a data or fax once or
after 10 minutes.
2. Voice calls can not be received when Data or Fax
modes are set.
3. Data Service Mode (F71) is automatically set to
“Circuit” when the Data/Fax Mode (F72) is set to
Data or Fax.
4. When your phone is to Data or fax, you can only
use .
5. Data/Fax mode (F72) can not be set if TTY mode
is active.
6. To send data or fax, the Data/Fax mode (F72) set-
ting is not necessary. Service Mode (F71) must
be set to “Circuit” to send data or fax.
TTY Mode (F73)
Your phone is able to operate with a TTY (Teletypewriter)
device on 45.5 baud in both analog and digital modes.
Connect a TTY device to the phone at the earphone-
microphone jack, activate the TTY mode and you will
place or receive calls in the same manner as ordinary
calls. This feature is network dependent in the digital
mode, and may not be available in all areas.
Activating TTY Mode
Press
F
7
PQRS
3
DEF
, scroll to
“On” and press
F
. “TTY” will
appear on the display.
Deactivating TTY Mode
Press
F
7
PQRS
3
DEF
, scroll to “Off” and press
F
.
“TTY” will disappear.
OK
TTY
Mode F73
Off
On
OK
Data/Fax
Mode F72
Off
Data