Airlink101 Super GTM Wireless PCI Adapter AWLH4130 - Manual (Page 3)

Section 3 Section 2
Configure the PCI Adapter
Step 1 To open the cardbus adapter’s utility, double-click on the WLAN Monitor
Icon in the system tray.
Step 2 Select the SSID of the wireless network you wish to connect to from the
Available WLANs box and click Connect.
Step 3 You will be prompted for the security key if you have one setup for your
wireless network. Verify the key you enter is correct and click Connect.
The utility automatically adds an available wireless network to the Preferred
WLANs box. If no SSID is added, or if the SSID is wrong, please refer to the
following steps to join the appropriate wireless network.
Step 4 Verify the SSID you have selected is in the Preferred WLANs box and
click Apply.
Note: Be sure to remove the wrong SSID from the Preferred WLANs box. You
can remove the wrong SSID by selecting it and clicking on Remove.