American Standard Acrylic 6034.ST - Manual

H137
© 2008 AS America Inc. Revised 3/02
ALCOVE SHOWER BASE
Product Features:
• Acrylic with fiberglass reinforcement
• Single threshold unit
• Textured bottom pattern
• Integral self-leveling base
• Integral three-sided, double tiling edge
with water retention flange
• Molded-in flood guard
• PVC shower drain with stainless steel
drain plate
❏ 6034.ST ALCOVE SHOWER BASE
Nominal Dimensions:
1527 x 867 x 168mm
(60-1/8" x 34-1/8" x 6-5/8")
❏ 4834.ST ALCOVE SHOWER BASE
Nominal Dimensions:
1222 x 870 x 168mm
(48-1/8" x 34-1/4" x 6-5/8")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ANSI Z124.2 for Plastic Shower
• ASTM E162 for Surface Flammability
• NFPA 258 for Smoke Density
To Be Specified - Required:
❏
Color: (specify American Standard fixture color)
To Be Specified - Optional:
❏
Metal Drain Plate:
❏ 751819-099 in Polished Brass
or
❏ 751819-295 in Satin Nickel
ALCOVE
SHOWER BASE
HIGH GLOSS ACRYLIC
NOTES:
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH SHOWER
BASE FOR ADDITIONAL INFORMATION.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard Z124.1 / CSA. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS