Adder Technology AdderView AV4OSD - Manual (Page 29)

AdderView Installation and Use Page 28
Microsoft IntelliMouse
Logitech Pilot Mouse +
Logitech MouseMan+
Genius NetMouse
Genius NetMouse Pro
Standard PS/2 and IntelliMouse compatible mice can be connected to the control
port. You may configure your CPUs using Microsoft PS/2 or IntelliMouse drivers in
any combination as required. The IntelliMouse features are supported on both PS/2
and RS232 CPU connections. When using PS/2 CPU connections, the AdderView
will automatically configure itself to the type of mouse requested by the driver. If you
are using RS232 CPU connections then you will need to select mouse options U4 or
U5 to enable the IntelliMouse features.
U1 - AdderView channels are switchable using a 3 button mouse
or IntelliMouse (default)
(AdderView reports 2 button mouse mode to PCs)
U2 - AdderView channels are not switchable using 3 button mouse
or IntelliMouse
(AdderView reports 2 button mouse mode to PCs)
U3 - AdderView channels are not switchable using 3 button mouse
or IntelliMouse
(AdderView reports 3 button mouse mode to PCs)
U4 - AdderView channels are switchable using 3 button mouse
or IntelliMouse
(AdderView reports IntelliMouse mode to PCs)
U5 - AdderView channels are not switchable using 3 button mouse
or IntelliMouse
(AdderView reports IntelliMouse mode to PCs)
4.4 Keyboard hotkey combination
The keyboard hotkey combination is used to change a channel, set autoscan mode
or secure the product (so that the password needs to be typed before it can be used
again). The following keyboard hotkey combinations can be selected. These hotkey
combinations are used together with the command keys to trigger the required