PROLiNK Hurricane 9000W - Manual (Page 17)

1 7
4.7 Advanced Setup.
Section Four: Web-Based Management
The Wireless page allows user to set the configuration for the Wireless
Part.
4.7.1 Wireless.
SSID: Service Set Identifier, is the workgroup name of your Wireless
Network. You have to assign an ESSID for identification.
Channel: There are 13 channels (1-13) available for with the Access
Point. All devices communicating with the device must use the same
channel. You have to select a Channel No as the Channel ID for
identification.
Security: WEP Encryption (Wired Equivalent Privacy) is set to Disabled
by default. When WEP is enabled, data packet is encrypted before
transmitted to prevent data packets are eavesdropped by unrelated
people. By using WEP data encryption, there may be a significant
degradation of the data throughput on the wireless link.
Key Length: there are two options: 64-bit and 128-bit.