Aico 160 Series - Manual (Page 14)

Low Voltage Smoke & Heat Alarms
Other Smoke & Heat Alarms and Control
In properties where there is a requirement to connect smoke and heat
alarms to a low voltage security system, or Warden Call System, the Ei180
Series alarms can provide the ideal solution.
14
Surface Mount Kits enable easier installation of the alarms. Relays
provide the option of signalling to almost any other device. Relays
can be used to signal to: Warden Call Systems Strobes
Sounders Door Closers
Smoke Vents Other Fire Alarm Systems
Code Description
Ei181 10-30VDC Ionisation Smoke Alarm
Ei184 10-30VDC Heat Alarm
Ei186 10-30VDC Optical Smoke Alarm
Ei100R 12VDC Ionisation Smoke Alarm
Ei103R 12VDC Heat Alarm
Ei105R 12VDC Optical Smoke Alarm
140 and 160RC Series options
Ei127 - Surface Mounting Kit for use on uneven ceilings or
where complicated wiring is used.
Ei128R - As Ei127 with integral relay
(Not compatible with RC Models).
Ei128RBU - As Ei128R with 10yr+ rechargeable cell back-up supply.
Ei128COV - Cover to enable Ei128R/Ei128RBU to be remotely sited.
RadioLINK
Ei428 - Remote relay module for use with RadioLINK system
only, see page 11.
10 Year Alarms
For applications where the budget will not permit the
installation of mains powered smoke alarms or there is a need
to quickly provide safe and reliable protection to a large
number of properties, the best solution is to specify Ei smoke
alarms powered by 10 year + lithium battery cells.
Surface Mount Kits & Relays for 140, 150 & 160RC Series
Code Description
Ei100TYC Ionisation Smoke Alarm
Ei3105TYCH Optical Smoke Alarm