Aico 160 Series - Manual (Page 11)

Interconnection
ies Smoke & Heat Alarms
RadioLINK
SYSTEM CONTROL DEVICES
Slide a 160RC Series
alarm on to the
Ei168RC base which
will automatically
activate the
rechargeable
back-up cells, and
then repeat this
procedure for all the
alarms in the system. House code
each alarm in
the system.
Easy to fit
Ei411H Wireless
Remote Control
Switch
● When used in conjunction
with RC alarms, with the
Ei168RC RadioLINK base,
the switch offers three vital
remote control functions.
● TEST - Provides a full system
test equivalent to pressing the
Test button on all units
simultaneously
● HUSH - Allows the silencing of
any possible nuisance alarms
● LOCATE - Allows the source of
the alarms to be identified.
This information is also held in
the product memory
Ei428 Remote Relay Module
● Mains powered with rechargeable 10 year+
lithium cell back-up to ensure the relay
operates even during a mains failure
● Interfaces with other systems, e.g. warden call
and other signal devices
Ei407 Wireless Manual Call Point
● Allows manual testing of the system
● Allows manual alarm to warn other
residents
Ei410 Wireless Remote
Control - Hand Held
● All the same features and functions
as the Ei411H (above) - but built into a
small key fob for personal use
● Fitted with lithium button cell
11
Wire in each
Ei168RC
RadioLINK
base to the
mains
electricity
supply.
NEW NEW NEW
The Ei168RC RadioLINK Base Unit
At the heart of the RadioLINK system are the Ei168RC base units,
which are fully compatible with any Ei160RC Series alarm.
It is from these that radio signals are transmitted and received.
An Ei168RC base is required for each of the alarms in
the system.
● Mains powered with rechargeable 10 year+ lithium
cell back-up
● Radio transceiver 868.499 MHz
● Unique Easi-fit design with integral terminal block
● Simple and secure house coding system
● Interference free