Safety, Safety decals, Dl safety labels – Poweramp VH SERIES HYDRAULIC 10.2011 User Manual
Page 7: Do not fork this side, Dock leveler, Safety label locations, Danger

5
SAFETY
4111-0002 — Sept 2010
Safety Decals
Every 90 days (quarterly) inspect all safety labels and tags
to ensure they are on the dock leveler and are easily leg-
ible. If any are missing or require replacement, please call
1-800-643-5424 for replacements.
TOLERANCES
(UNLESS OTHERWISE NOTED)
FRACTIONAL:
1/32"
DECIMAL:
.00 =
.01"
.000 =
.005"
ANGULAR:
1
MATERIAL
DRAWN BY
CHECKED BY
DRAWING NO.
DATE
BKM
10/17/2008
DL SAFETY
LABELS
DOCK LEVELER
P O W E R A M P
M C G U I R E
D L M
L o a d i n g D o c k E q u i p m e n t
This print is the property of Systems, Inc. and represents a proprietary article in which Systems, Inc. retains any and all
patent and other rights, including exclusive rights of use and/or manufacture and/or sale. Possession of this print does
not convey any permission to reproduce, print or manufacture the article or articles shown therein, such permission to be
granted only by written authorization signed by an officer or other authorized agent of Systems, Inc. thereof.
SAFETY LABEL LOCATIONS
1751-0727
1751-0138
2
.
4
0
"
5.06"
Control Box Size:
Decal Size: 5.06 x 2.40
File Name: 1751-0727
CRUSH HAZARD
Maintenance prop must
support leveler behind bar.
Do not force maintenance
prop forward of bar to
support lip. Refer to
owner ’s/user ’s manual for
proper use. Failure to
comply will result in
death or serious injury.
DANGER
1751-0727
Control Box Size:
Decal Size: 4 x 2
File Name: 1751-0138 Rev A
DANGER
!
CRUSH HAZARD
DO NOT REMOVE hydraulic cylinder until leveler is
safely supported by maintenance prop. Refer to
owner’s/user’s manual for proper maintenance
procedure. Failure to comply will result in death or
serious injury.
1
.
0
2
"
8.72"
Control Box Size:
Decal Size: 8.72 x 1.02
File Name: 1751-0729 Rev A
CRUSH HAZARD
Do not work under dock leveler unless this maintenance prop has been secured in the
upright position. See owner ’s/user ’s manual for proper procedures. Failure to comply
will result in death or serious injury.
DANGER
1751-0729
2
.
4
0
"
5.05"
Control Box Size:
Decal Size: 5.05 x 2.40
File Name: 1751-0731Rev A
CRUSH HAZARD
Rotate prop to maintenance
position. Open the pin latch
and insert through the
maintenance prop housing.
Close the pin latch to secure
prop. Use every time dock
leveler is serviced. Failure to
comply will result in death
or serious injury.
DANGER
1751-0731
CRUSH HAZARD
DO NOT ENTER PIT unless dock leveler is
safely supported by maintenance prop. Place
barriers on driveway and dock floor to indicate
service work being performed. Refer to
owner ’s/user ’s manual for proper maintenance
procedures. Failure to comply will result in death
or serious injury.
DANGER
1751-0726
2
.
3
6
"
5.92"
Control Box Size:
Decal Size: 5.92 x 2.36
File Name: 1751-0726
1751-0729
1751-0731
1751-0726
3
.
2
5
"
9.12"
Unsupported dock leveler
ramps can lower unexpectedly.
Before allowing vehicle to leave
the dock always:
!
Ensure that no equipment,
material or people are on the
dock leveler.
!
Return the dock leveler to its
stored position at dock level.
Failure to follow posted instructions will result in death or serious injur y.
SAFETY INFORMATION
Call 262.255.1510 for replacement placards, warning labels, or owner ’s/user ’s manuals.
Operation
1.
Read and follow all instructions and
warnings in the owner ’s/user ’s
manual.
2.
Use of dock leveler restricted to
trained operators
3.
Always chock trailer wheels or
engage truck restraint before
operating dock leveler or beginning to
load or unload.
4.
Never use hands or equipment to
move the ramp or lip
5.
Before activating dock leveler:
¥ Ensure trailer is backed in against
bumpers.
¥ Remove any end loads if required.
¥ Check trailer alignment to avoid lip
interference. If lip does not lower to
trailer bed, reposition vehicle.
6.
Ensure that truck bed supports
extended lip or the leveler frame
supports the ramp before driving on
ramp.
7.
Stay clear of hinges and front and
sides of moving dock leveler.
8.
Never use damaged or
malfunctioning dock leveler. Report
problems immediately to supervisor.
Maintenance/Service
1.
Read and follow all instructions,
warnings and maintenance schedules
in the owner ’s/user ’s manual.
2.
Maintenance/Service of dock leveler
restricted to trained personnel.
3.
Place barriers on the driveway and on
dock floor to indicate service work is
being performed.
4.
DO NOT ENTER PIT unless dock
leveler is securely supported by
maintenance prop.
5.
If electrically powered turn off and use
OSHA lockout/tagout procedures.
Control Box Size:
Decal Size: 9.12 x 3.25
File Name: 1751-0730
DANGER
Control Box Size:
Decal Size: 13 x 2
File Name: 1751-0329
DO NOT
FORK THIS SIDE
Control Box Size:
Decal Size: 6 x 2
File Name: 1751-0330 REV A
FORK
HERE
1751-0730
(x2)
(decal placed in same position on both sides)
(decal placed in same position on both sides)
(decal placed in same position on both sides)
1751-0329
(x2)
1751-0330
(x2)