Alto-Shaam Cook - Manual (Page 16)

PG . 14 767-SK/III, 1767-SK/III, 2800-SK/III INSTALLATION / OPERATION / SERVICE MANUAL
O P E R A T I N G I N S T R U C T I O N S
Cook/Hold/Smoke Instructions
Press and release control O
N
/ O
FF
key. The oven will beep for one second and power to the unit
will be indicated by an illuminated green indicator light located in the upper left corner of the
O
N
/O
FF
key. The oven will begin operating in the hold mode. The amber H
OLD
indicator will be
illuminated and the last set hold temperature will be displayed.
To set Cook temperature — Press C
OOK
Key. Oven preheat indicator will illuminate and the last
set cooking temperature is displayed. To change the cook temperature, press the U
P
or D
OWN
A
RROW
Keys.
If cooking by time — press the T
IME
Key. The green T
IME
indicator will illuminate and the last set
cooking time will be displayed. To change the set time, press the U
P
or D
OWN
A
RROW
Key. The
display will alternate between the set temperature and the elapsed time.
If cooking by probe — press the P
ROBE
Key. The green P
ROBE
indicator will illuminate and the last
set internal product temperature will be displayed. To change the set temperature, press the U
P
or D
OWN
A
RROW
Key. The display will alternate between the set temperature, the elapsed time,
and the probe temperature.
To set Hold temperature — Press the H
OLD
Key. The green cook indicator light will remain
illuminated. To change the hold temperature, press the U
P
or D
OWN
A
RROW
Key. The display will
alternate between the set hold temperature and the amount of time the product has been in the
hold mode. Oven will remain in the H
OLD
mode until the O
N
/O
FF
key is pressed.
To set Smoke time (hot smoke) — Press S
MOKER
Key. To set the smoke time desired, use U
P
or
D
OWN
A
RROW
key. The last set time will be displayed. See following page for additional Smoking
Procedures.
Press S
TART
key to begin cooking cycle.
To Cook/Hold/Smoke using Preset Menu Keys
Press Desired P
RESET
Key (A through H). P
RESET
Keys with stored cooking programs will have
green indicator illuminated. The oven will automatically enter preheat mode. Oven will beep
periodically when it has reached a preheat ready state, and both the Ready and Start indicator
lights will flash. To program a preset menu key, see Programming a Preset in this manual.
Press S
TART
key to begin cooking cycle.
C A U T I O N
TO MAINTAIN SAFE TEMPERATURE
LEVELS, COLD FOOD FOR
RETHERMALIZATION OR REHEATING
MUST NEVER BE ADDED TO THE OVEN
WHILE HOT FOODS ARE BEING HELD.