PASCO CI-6620 EKG Sensor Electrode Patches - Manual (Page 3)

MATERIAL SAFETY DATA SHEET
Tab Diagnostic EKG Electrodes –
Conductive Silver
Revision Date: February 1, 2005 Page 3 of 6
Body Protection
Normal work wear.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State Solid article
Color Various
Odor Odorless
pH Approximately 3 - 5 (based on conductive salt contained within)
Specific Gravity Not applicable
Boiling Range/Point (°C/F) Not applicable
Melting Point (°C/F) Not applicable
Flash Point (PMCC) (°C) Not applicable
Vapor Pressure Negligible
Solubility in Water Completely insoluble
Vapor Density (Air = 1) Not applicable
Evaporation Rate Not applicable
VOC (g/l) 0.0
10. STABILITY AND REACTIVITY
Stability
Stable under normal conditions.
Conditions to Avoid
- Contact with incompatible materials
Materials to Avoid
- Strong oxidizing agents - Strong Bases
Hazardous Polymerization
Will not occur.
Hazardous Decomposition Products
- oxides of carbon – oxides of silver – oxides of tin - hydrogen chloride
11. TOXICOLOGICAL INFORMATION
Acute Toxicity
(Electrode) Primary skin irritation (modified Draize testing) was non-irritating.
(Electrode) This article has tested negative for skin sensitization by Buehler Patch testing.
(Electrode) USP Agar Diffusion testing has shown this article to be non-cytotoxic.
Chronic Toxicity/Carcinogenicity
This product is not expected to cause long term adverse health effects.
Genotoxicity
This product is not expected to cause any mutagenic effects.
Reproductive/Developmental Toxicity
This product is not expected to cause reproductive or developmental health effects.