Material safety data sheet, First aid measures, Fire fighting measures – PASCO CI-6620 EKG Sensor Electrode Patches User Manual
Page 2: Accidental release measures, Handling and storage, Exposure controls/personal protection
MATERIAL SAFETY DATA SHEET
Tab Diagnostic EKG Electrodes –
Conductive Silver
Revision Date: February 1, 2005
Page 2 of 6
4.
FIRST AID MEASURES
Eyes
Immediately flood the eye with plenty of water for at least 15 minutes, holding the eye open. Obtain
medical attention if soreness or redness persists.
Skin
Wash skin thoroughly with soap and water. Continue washing for at least 15 minutes. Remove
contaminated clothing as washing proceeds. Obtain medical attention if blistering occurs or redness
persists.
Ingestion
If article is accidentally swallowed, seek medical attention immediately.
Inhalation
Inhalation hazard is not possible with this article.
Advice to Physicians
Treat symptomatically.
5.
FIRE FIGHTING MEASURES
Extinguishing Media
Not Flammable. Select extinguishing agent appropriate to other materials involved.
Unusual Fire and Explosion Hazards
This product may give rise to hazardous fumes in a fire.
Protective Equipment for Fire-Fighting
Wear full protective clothing and self-contained breathing apparatus.
6.
ACCIDENTAL RELEASE MEASURES
This article should be picked up or sweep up and disposed of as solid waste.
7.
HANDLING AND STORAGE
Wear appropriate personal protective equipment when handling. Storage area should be: - cool - dry
8.
EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational Exposure Standards
Exposure limits are listed below, if they exist.
Electrode
None assigned.
Engineering Control Measures
No specific controls are necessary.
Respiratory Protection
Respiratory protection is not required.
Hand Protection
Protective gloves.
Eye Protection
Chemical goggles or safety glasses with side shields may be worn.