Alto-Shaam 1000-TH/III - Manual (Page 13)

TH/III InsTallaTIon / operaTIon / servIce manual pg . 11
S I T E I N S T A L L A T I O N
I N S T A L L A T I O N
drIp TrAy INSTALLATION INSTrucTIONS
w A r N I N g
FAILurE TO prOpErLy INSTALL
ThE drIp TrAy cAN Or wILL
cAuSE MAJOr EQuIpMENT
dAMAgE ANd wILL rESuLT IN
A LEAKAgE hAZArd ThAT cAN
cAuSE pErSONAL INJury.
1. Poke holes through double-sided tape a which is attached to the back of drip tray holder b .
2. Remove backing on double-sided tape a .
3. Put screws c through holes and attach drip tray holder b to unit.
4. Optional, but strongly recommended - apply a line of food-grade silicone caulk along top edge
of drip tray holder b to seal.
5. Place drip tray d in drip tray holder b .
a b
c
d
item Description Qty
1 Double-Sided Tape 1
2 Drip Tray Holder 1
3 8-32 x 1/4” Phil Screw 3
4 Drip Tray 1