Axis Communications Axis 211A User Manual

Page 13

AXIS 210A/211A - Accessing the Camera

Audio controls for AXIS 210A/211A
There are also controls for controlling the client computer’s speaker output and

microphone sensitivity. These controls are only available when audio is enabled, see

Push-to-talk settings are made in the AMC control panel, see

The Live View toolbar displays the following buttons:

The Play/Stop button starts and stops the live video stream.

The Snapshot button saves a snapshot of the video image displayed. The Snapshot

function and the target directory for saving snapshots can be configured from the

AMC Control Applet in the Windows Control Panel (Internet Explorer for

Click the View Full Screen button to make the video image fill the entire screen

area. Press Esc (Escape) on the computer keyboard to exit full screen, or

right-click and select the option.
The record button is used to record the current video stream. The location where

the image file is saved can be specified using the AMC control panel. To enable

recording, Select Live View Config > Viewer Settings > Enable recording

button.

Click the Speaker and Microphone buttons to switch the sound off and on for

the speaker and microphone, respectively.

Use the sliders to control the volume on the speaker and

microphone. The volume can be set between 0 and 100. The buffer

slider controls the size of the buffer for audio. A higher level will

reduce audio break-up, but may introduce a noticeable lag in

audio transmission. There are four settings - min, low, high, and

max.

When using Half-du

plex mode, this button toggles between allowing you to

speak and listen. The first icon indicates that you can talk and the speaker

attached to the camera will play your voice. The second indicates that you

hear audio from the camera, but no audio is sent to any web clients.

When in simplex talk mode, the icon allows you to speak and is dimmed when you

do not want other clients to receive any audio.