Aruba Spa 2003 Serenade - Manual (Page 10)

ELECTRIC ELECTRIC AL CONNECTION AL CONNECTION
A certified electrician must make all electrical connections to
your spa, in accordance with all applicable electrical codes
for your area. The spa’s GFCI breaker must be sized in accor-
dance to electrical requirements of spa. The Full Load
Amperage (FLA) is recorded on the spa’s nameplate.
ELECTRICAL CONNECTION ACCESS
To access Electrical connections:
Electrical connections are within the spa pack. There are 2
wire access locations on either side of the front panel. The
electrical requirements are 220V with a neutral.
IMPORTANT SAFETY INSTRUCTIONS
1. Read and follow all instructions.
2. A ground terminal is located inside the supply terminal
box. To reduce the risk of electric shock this terminal must
be connected to the grounding means provided in the electric
GND
N
L1
L2
WARNING
Failure to use a GFCI breaker for electrical
connection to your spa could result in seri-
ous harm or death. No electrical power
should be available near the spa without
GFCI protection.
WARNING
Electrical codes change from Province to
Province. Check with your electrician for
the electrical codes in your area.
8