Asus M2N8-VMX - Manual (Page 66)

2-22 Chapter 2: BIOS setup
Memclock Mode [Auto]
Select the DRAM Frequency programming method. If Auto, the DRAM
speed will be based on SPDs. If Limit, the DRAM speed will not exceed
the specified value. If Manual, the DRAM specified will be programmed
regardless.
Configuration options: [Auto] [Limit] [Manual]
MCT Timing Mode [Auto]
Configuration options: [Auto] [Manual]
Bank Interleaving [Disabled]
Enable or disable the Bank Memory Interleaving.
Configuration options: [Disabled] [Auto]
Enable Clock to All DIMMs [Disabled]
Enable or disable the Unused Clocks to DIMMs Even Memory Slots are
not populated.
Configuration options: [Disabled] [Enabled]
MemCLK Tristate C3/ATLVID [Disabled]
Enable or disable the MemCLK Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Enable or disable the Memory Remapping Around Memory Hole.
Configuration options: [Disabled] [Enabled]
Memory Configuration
Memclock Mode [Auto]
MCT Timing Mode [Auto]
Bank Interleaving [ Disabled ]
Enable Clock to ALL DIMMs [Disabled]
MemCLK Tristate C3/ATLVID [Disabled]
Memory Hole Remapping [Enabled]
Memory Configuration