2 cpu configuration, Gart error reporting [disabled, Mtrr mapping [continuous – Asus M2N8-VMX User Manual
Page 64: Runtime legacy psb [disabled, Cool’n’quiet [enabled
2-20
Chapter 2: BIOS setup
2.4.2 CPU Configuration
The items in this menu show the CPU-related information that the BIOS
automatically detects.
Unlock locked CPU
and let it run at
lower multiplier
setting.
CPU Configuration
Module Version: 13.05
AGESA Version: 02.06.09
Physical Count: 1
Logical Count: 1
AMD Sempron(tm) Processor 3200+
Revision: F2
Cache L1: 64KB
Cache L2: 128KB
Speed : 1800MHz
Current FSB Multiplier: 9x
Maximum FSB Multiplier: 9x
Able to Change Freq. : Yes
uCode Patch Level : None Required
GART Error Reporting [Disabled]
MTRR Mapping [Continuous]
Runtime Legacy PSB [Disabled]
Cool’n’Quiet [Enabled]
AMD Overclocking Configuration
GART Error Reporting [Disabled]
This option should remain disabled for the normal operation. The driver
developer may enable it for testing purpose.
Configuration options: [Disabled] [Enabled]
MTRR Mapping [Continuous]
This option determines the method used for programming CPU MTRRs when
4GB or more of memory is present. Discrete leaves the PCI hole below the
4GB boundary undescribed. Continuous explicitly describes the PCI hole as
non-caheable. Configuration options: [Continuous] [Discrete]
Runtime Legacy PSB [Disabled]
Enables or disables the generation of Power State Block for use of
PowerNow(tm) driver in a single core system.
Configuration options: [Disabled] [Enabled]
Cool’n’Quiet [Enabled]
Enables or disables the AMD Cool’n’Quiet function.
Configuration options: [Disabled] [Enabled]