PASCO DataStudio Starter Manual - Manual (Page 9)

®
Manual No. 012-08107 DataStudio Starter Manual
9
Sensors Panel
The Sensors panel lists all possible sensors. Scroll through the list to find the senor(s) for the
experiment. To select a sensor, double-click the icon in the Sensors panel. The software will
automatically choose the correct available port.
Now connect the physical sensor into the corresponding channel.
When a sensor is selected, an icon will appear in the experiment setup window, with an arrow
indicating the appropriate channel for each sensor. Double clicking the sensor icon in this window will
open up the sensor properties window where you can set measurement(s), calibration and sampling
rate. The available measurements are shown in the summary panel.