AT&T DECT TL91278 - Manual (Page 44)

Telephone operation
39
Call transfer using intercom
Use the intercom feature to transfer an outside
call to another system handset. This feature is not
This feature is not
available on model TL91178.
Model TL91�78 (two-handset system)
1. When on an outside call, press
MENU/
SELECT
to
enter the feature menu.
2. Use DIR / CID to scroll to
> TRANSFER, then press
MENU
/SELECT. The
outside call is automatically placed on hold.
The transferring handset’s screen shows
CALLING OTHER HANDSET. The called handset
rings, and its screen shows
OTHER HANDSET
IS CALLING.
3. On the ringing handset, press HOME
/FLASH
or SPEAKER to answer the intercom call. You
can now talk without the outside caller hearing
the conversation.
4. Press OFF
/CLEAR
on the transferring
handset or place it in the telephone base or
handset charger to complete the transfer.
The transferring handset’s screen shows
CALL TRANSFERED and the other handset is
automatically connected to the outside call.
-OR-
Press HOME
/FLASH
or CELLULAR
(depending on which call is being transferred)
on the called handset to let both parties
conference with the external line.
NOTES:
1. Before the intercom call
is answered, press and
hold OFF/
CLEAR
to
cancel the transfer and
return to the outside call.
2. If the called handset does
not answer the intercom
call within 100 seconds,
is in directory or caller ID
history mode, or is out
of range, the transferring
handset shows UNABLE
TO CALL TRY AGAIN
on its screen and
automatically returns to
the outside call.
3. You can end the intercom
call and return to the
outside call by pressing
HOME/FLASH or
CELLULAR (depending
on which call is being
transferred) on the
transferring handset, or
pressing OFF/
CLEAR
on
the called handset.