AT&T DECT TL91278 - Manual (Page 27)

Handset settings
22
Handset settings
Using the feature menu, you can change many of
the telephone’s settings.
1. Press
MENU/
SELECT
when in idle mode (when
the phone is not in use) to enter the feature
menu.
2. Use DIR / CID to scroll to the feature
to be changed. When scrolling through the
menu, the top menu item is always highlighted
with a
> symbol.
3. Press
MENU
/SELECT to select the highlighted
item.
Ringer volume
Using this menu, you can set the ringer volume
level (1-6), or turn the ringer off. When the ringer
is turned off,
appears on the handset screen.
The volume setting applies to both HOME and
CELLULAR calls.
To adjust the
RINGER VOLUME:
1. Press MENU/
SELECT
when in idle mode to enter
the feature menu.
2. Use DIR / CID to scroll to > RINGER
VOLUME, then press
MENU
/SELECT.
3. Press DIR / CID to sample each volume
level.
4. Press
MENU
/SELECT to save your preference and
return to the feature menu.
NOTE: The ringer volume also determines the ringer
volume of the intercom calls (pages 37-38) and the
paging tone for the handset locator feature (page 32). If
the handset ringer volume is set to off, that handset is
silenced for all incoming calls and paging.
>RINGER VOLUME
RINGER TONE
>DIRECTORY
CALL LOG
NOTE: Press
OFF
/CLEAR to
cancel an operation,
back up to the
previous menu or exit
the menu display.
Press and hold
OFF
/CLEAR to
return to idle mode.
RINGER VOLUME
>DIRECTORY
CALL LOG