Nova-Tech Anti-Vibration Table - Manual (Page 5)

4.3 MAIN TABLE ASSEMBLY DIAGRAM
Assembly instructions:
1. Assemble the FRONT TRIM PANEL using four M8 x 16 screws onto
the 2 x MAIN TABLE SIDE ASSEMBLIES.
2. Fix the 2 x TABLE RAILS using eight M8 x 16 screws onto the MAIN
TABLE SIDE ASSEMBLIES.
3. Put the TABLE TOP onto the main frame using the four Z-CLIPS and
four M8 x 16 screws. Two Z-CLIPS should be fitted and secured first
and then the other two can be fitted when the table top is in place
from underneath. Make sure that the table top is fitted squarely.
4. Now place the MAIN TABLE over the top of the INNER TABLE
making sure that the marble is not touching the table top.
5. The feet can now be adjusted to level the tables. NOTE: For
weighing a larger unit that is larger than the marble slab area, we
suggest you raise the marble slab a few millimetres higher than
the table top so that the overhang portion of the unit does not
touch the table top.
© Adam Equipment Company 2007
5
[email protected] CALL Toll Free: 1-866-433-6682 or 1-281-359-8538
www.novatech-usa.com FAX Toll Free: 1-866-433-6684 or 1-281-359-0084