Nova-Tech Anti-Vibration Table - Manual (Page 4)

4.2 INNER TABLE ASSEMBLY DIAGRAM
Assembly instructions:
1. Assemble the 3 x INNER TABLE RAILS using the HEXAGON
SPANNER with twelve M8 x 16 screws onto the 2 x INNER TABLE
SIDE ASSEMBLIES. Pay attention that the rails are assembled with
the holes facing downwards.
2. Assemble the MARBLE SUPPORT RAILS using four M8 x 16 screws
onto the INNER TABLE RAILS.
3. Assemble the four ADJUSTABLE FEET into the MARBLE SUPPORT
RAILS and then add the four RUBBERS to the ADJUSTABLE FEET.
4. Place the MARBLE onto the RUBBERS making sure that the marble
is centrally located.
© Adam Equipment Company 2007
4
[email protected] CALL Toll Free: 1-866-433-6682 or 1-281-359-8538
www.novatech-usa.com FAX Toll Free: 1-866-433-6684 or 1-281-359-0084