Nova-Tech GKa Indicator User Manual
Page 28

26 © Adam Equipment Company 2011
•
If the indicator shows “x x . x x %”, which is the last weight used as a reference,
press [CE] to clear and use the numeric keypad to enter a new value. Press
[Tare] to accept the new reference weight.
•
The weight entered must be greater than 50 scale divisions.
•
Press [Unit] to return to normal weighing.
NOTE:
The display may jump by large numbers unexpectedly if small weights are used to
set as 100% reference. The indicator checks if the weight is too small and will show
Error 7.