NetMedia UTPSET User Manual
Nm-utpset, Utp encoder/decoder set, Features
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com
UTP Encoder/Decoder Set
NM-UTPSET
Video and Power Transmission Device
MAN-UTPSET REV0703A
One Wire Video™ Installation
Supports popular color and B/W cameras
Provides remote 12V DC 150mA power
Uses one inexpensive UTP cable
Uses pre-existing CAT5 or better cable
Supports up to 1000 ft with color and B/W
Supports industry standard wiring schemes
Supports standard RJ-45 plugs
Sturdy aluminum boxes
Includes power supply
1 year limited warranty
Input/Output Video Connector:
Input/Output Video Signal:
Encoder/Decoder Video Connector:
Encoder/Decoder Video Signal:
Encoder/Decoder Cable Type:
Encoder/Decoder Cable Distance Range:
UTP Encoder Size:
UTP Encoder Weight:
UTP Encoder Power Output:
UTP Encoder Power Connector:
UTP Decoder Size:
UTP Decoder Weight:
UTP Decoder Power Input:
UTP Decoder Power Connector:
FEATURES
Product Includes:
1. NetMedia UTP Video Encoder module.
2. NetMedia UTP Video Decoder module.
3. 24V DC 200mA Power Transformer.
3. Power Extension Cable and two RCA Video Cables.
The NetMedia UTP Video Encoder and Decoder modules allow popular 12V DC cameras to use Unshielded Twisted Pair
(UTP) cable, such as CAT5, for both power and video. There is no need to run multiple cables to the camera location! The
modules support cable distances up to 1000 feet. To view the video, use a security monitor or the composite RCA Video
Input jack of a television.
Female RCA
Composite
Female RJ-45 jack
Proprietary
UTP: CAT5 or better
Up to 1000’
3.2” long, 2.2” wide, 0.9” thick
3 oz.
12V DC, 150mA
5.5mm OD, 2.1mm ID, center positive
3.2” long, 2.2” wide, 0.9” thick
3 oz.
24V DC, 200mA
5.5mm OD, 2.1mm ID, center positive
(subject to change without notice)
SPECIFICATIONS
Power Input
Uses 24V DC from included
Power Transformer.
UTP Jack
Connects to Encoder UTP
Jack via straight-through
wired UTP cable (T-568A).
Red LED
Indicates Power.
RCA Video Out
Connects to viewing
device such as monitor,
DVR, TV, or modulator.
UTP Video Decoder
UTP Jack
Connects to Decoder UTP
Jack via straight-through
wired UTP cable (T-568A).
Green LED
Indicates Power.
RCA Video In
Connects to video
output of camera.
UTP Video Encoder
Power Extension Cable
Connects to 12V DC power
input of camera.
Power Transformer
Connects to 24V DC Power
Input of Decoder and AC outlet.
(Front)
(Back)
(Front)
(Back)
Power Output
Provides 12V DC 150mA
power for camera.
NM-UTPSET