NetMedia TUNER - Manual

NM-
TUNER
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com
Standard TV Sequencing Tuner
NM-TUNER
MAN-TUNER REV0902A
Multi-Channel Demodulator
RF Input Connector
Connects modulated input
channels from video
distribution system.
DIP Switches
Selects input channels
(VHF/UHF 2-83
CABLE 2-135) and
dwell time (1/10-16.5 sec).
End Plate
Remove to access
Switch Bank,
CABLE/AIR Switch,
and Save Button.
Save Button
Saves selected channel
when using as sequencer.
Hold down while applying
power to reset device.
Video Output Connector
RCA composite output for devices such as
Quads, DVR’s, LCD displays, etc.
Power Input Connector
12V DC 300mA, center positive.
Provides demodulated audio and video
Perfect for existing modulated cameras
Works with quads, multiplexers, and DVR’s
TV tuner for LCD, Plasma, or CRT monitors
Uses composite input on HD and digital TV’s
Sequences multiple channels
VHF, UHF, & CABLE channel coverage
Channels retained during power outage
Tough aluminum housing
Includes power supply
1 year limited warranty Input Channels:
Input Connector:
Input Cable Type:
Video Output Signal:
Video Output Connector:
Audio Output Signal:
Audio Output Connectors:
Dwell Time:
Power Requirement:
Power Connector:
Housing Size:
Weight:
VHF/UHF 2-83, CABLE 2-135
Female F, 75 Ohm
RG59, RG6 or better
Composite
RCA Phono, 75 Ohm, 1 Vp-p
Monaural
2 - RCA Phono, 75,000 Ohm, 1 Vp-p
Up to 16.5 sec. in 1/10 sec. intervals
12V DC, 300mA
5.5mm OD, 2.1mm ID, center positive
3.9“ long x 5.5” wide x 0.9“ high
9.6 oz.
(subject to change without notice)
FEATURES
Audio Output Connectors
Left and Right monaural output.
Product Includes:
1. Tuner Assembly (Video Output Connector, 2 - Audio Output Connectors, RF Input Connector,
Power Input Connector, End Plate, DIP Switches, Save Button, CABLE/AIR Switch, Power LED).
2. 12V DC 300mA Power Transformer (Center Conductor Positive).
3. RCA Video Cable.
The NetMedia TUNER demodulates one or more analog standard definition channels and outputs a single
static or sequencing composite audio/video signal. Once demodulated, the selected channel(s) can be input
into monitors, multiplexers, quads, DVR’s, or any composite A/V device including HD and digital TV’s. This
provides convenient viewing access to modulated security cameras or analog antenna and cable TV signals.
SPECIFICATIONS
CABLE/AIR Switch
Selects for VHF/UHF/AIR or
CABLE frequency tuning.
Set to AIR when sequencing.
Power LED
Indicates that unit is on.