AEG LAVAMAT 72850 M - Manual (Page 11)

2. If required, pour fabric softener into the
compartment marked (the amount
used must not exceed the MAX mark in
the drawer).
Close the drawer gently.
Turn the programme dial (1) to set the required programme
You can choose the right programme for any type of laundry following the descriptions on
the washing programme tables (see «Washing Programmes» ).
Turn the programme dial to the required programme. The programme dial determines the
type of washing cycle (e.g. water level, drum movement, number of rinses) and the washing
temperature according to the type of laundry.
The light of button 7 starts blinking and the display shows the duration of the selected pro-
gramme.
The programme dial can be turned either clockwise or anticlockwise.
Position
= Reset programme / Switching OFF of the machine.
At the end of the programme the selector dial must be turned to position , to
switch the machine off.
If you turn the programme selector dial to another programme when the machine is work-
ing, the yellow pilot light of button 7 will blink 3 times and the message Err is displayed on
the display to indicate a wrong selection. The machine will not perform the new selected
programme.
Select the desired TEMPERATURE (Button 2)
When selecting a programme, the appliance automatically proposes the default tempera-
ture provided for that programme.
Press this button repeatedly to increase or decrease the temperature, if you want your
laundry to be washed at a temperature different from the one proposed by the washing
machine.
The symbol of cold wash corresponds to - - ( ) .
For the maximum and the minimum available wash water temperature, see «Washing pro-
grammes».
Daily use 11