Maintenance & inspection, Caution – Diamond Products M1AA-15 User Manual

Page 26

Text mode
Original mode

MAINTENANCE & INSPECTION

CAUTION

Be sure to turn SWITCH off and
unplug the machine before
maintenance and inspection.

NOTE:
Dust or dirt inside MOTOR is likely to cause motor failure. After each use, let
MOTOR idle and feed air into MOTOR to drive dust and dirt out.

NOTE:
In replacement, be sure to use our genuine carbon brush. You can remove
carbon brushes by detaching CARBON CAP (see DESCRIPTION) using a
straight blade screwdriver. After replacement, tighten CARBON CAP securely.