Multichannel Systems ADPT-32_4x8 - Manual (Page 2)

Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11
[email protected]
www.multichannelsystems.com
© 2011 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
Scope of delivery:
1 ADPT-32-4x8
Installation:
Connect four MPA8s on the rear side of the adapter. Make sure that the orientation of the MPA8s
are in correct position as prescribed above.
ADPT-32-4x8
Bottom side
Laterally view
MPA # 3
MPA # 4
MPA # 2
MPA # 1
MPA # 4
MPA # 2
MPA # 1
Bottom side: Make sure that the black sides of the four MPA8Is face to the adapter,
otherwise the miniature preamplifiers will not work!
Adapter for connecting four MPA8Is to the FlexMEA36