Multichannel Systems ADPT-32_4x8 - Manual

Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11
[email protected]
www.multichannelsystems.com
© 2011 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
ADPT-32-4x8
Warning: The device may only be used together with the MPA8I from Multi Channel Systems
MCS GmbH, and only for the specified purpose. Damage of the device and even fatal injuries
can result from improper use.
!
Top side
Bottom side
channel 09-16 : MPA8 # 2
channel 01-08 : MPA8 # 1 3 # MPA8 : channel 17-24
4 # MPA8 : channel 25-32
MPA8 # 2 fixed to the
lower connector
MPA8 # 1 fixed to the
upper connector
MPA8 # 3 fixed to the
lower connector
MPA8 # 4 fixed to the
upper connector
adapter 36 pins
holes for mounting on NN-RM
The ADPT-32-4x8 is a special adapter to merge four miniature preamplifiers MPA8I.
To guarantee the correct arrangements of the channels, it is mandatory to connect
the MPA8Is in the illustrated manner.
The pins of the connectors are not symmetric: No 1 and No 11 are for grounding,
No 2 is the reference. The 32 pin connector fits to the FlexMEA36 from Multi Channel
Systems MCS GmbH (ADPT-FM-32) and for 32-channel NeuroNexus Probe (ADPT-NN-32).
Adapter for connecting four MPA8Is to the FlexMEA36